Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

Diana

Designer: 
Doug Hylan
Skill Level to Build: 
advanced

Inspired by the reconstruction of a 1950's boat.

Nina

Designer: 
Sparkman & Stephens
Skill Level to Build: 

Design No. 1033 46'-6" W.L. Motorsailer

Swaggie

Designer: 
John Welsford
Skill Level to Build: 
basic woodworking skills

Small blue water cruiser with Junk rig, inside steering station, and accommodation for up to four persons. Suitable for home boatbuilders, all wood construction, lead ballast cast in small pigs.

AC 75 Evolution

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The AC 75 Evolution design input was to crate a trailerable boat with a small displacement, building with traditional materials such as wood. Another request was to have a comfort and an interior volume typical of larger size boats. We have...

ROBERTS 39 POWER SAILER

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

These catamarans were designed to be built using the fibreglass panel construction techniques. The method is very simple to use and perfect for the inexperienced builder. All of the developing is done

Panga25

Designer: 
Jacques Mertens
Skill Level to Build: 
easy, some epoxy experience useful

We designed a simple to build work boat with a vee-hull based on a proven work boat type, the Panga.

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...