Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

16' Quattro Catamaran

Designer: 
Richard and Lilian Woods
Skill Level to Build: 
Basic

High performance beach cat which is striking to look at and exciting to sail. Well-detailed plans of simple and rugged stitch-and-glue plywood hulls.

Construction: Stitch-and-glue plywood over bulkhead frames.

No lofting is required...

K-5m

Designer: 
Paul Kotzebue
Skill Level to Build: 
Intermediate to Advanced

28 ft full displacement sailboat. Strip planked double ender patterned after the design's of Nick Potter and L. Francis Herreshoff of the 1920's and 1930's.

24' 6" Sloop, TYPHOON

Designer: 
Winthrop Warner
Skill Level to Build: 
Advanced

A roomy auxiliary sloop in a small package.
Construction: Carvel planked over steamed frames.
Alternative construction: Cold-molded or strip.
Lofting is required.
Plans include 11 sheets.

Lynx

Designer: 
Mike Camp
Skill Level to Build: 
advanced

The 24-foot Lynx was designed as the smallest boat with which a couple could contemplate an ocean voyage. The hull is a multi-chine hull to make it easy to build in flat plate steel. There are two chines. The sheer shows a strong spring and it...

Martha's Tender

Designer: 
Joel White
Skill Level to Build: 
Basic

An easy-towing, easy-rowing tender featuring simple plywood construction and good capacity.

Construction: Plywood

No lofting is required

Plans include 3 sheets.

Willow Sea Kayak

Designer: 
Bill Thomas
Skill Level to Build: 
beginner/intermediate

The Willow is ideal for day paddles, but has the volume and solid performance required of a true expedition kayak. Featured in a how to build article in WB #195-197, taught at the WoodenBoat School.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

7' 7" Nutshell Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.xx

The ladder frame—the “foundation” of the boat—is now included with...