Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

ROBERTS 392

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 392 R/C Steel or Fiberglass This design is a companion to the Roberts 39 which until now has been available only in multi-chine hull form.

Volare Utility

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

‘Volare’ comes in two versions. This is the utility version, the console version is available as a separate set of plans. They’re both 15′4″ long and 5′ wide.

Her length is that of two sheets of 8′ plywood and she’s built in two halves (...

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

Panga25

Designer: 
Jacques Mertens
Skill Level to Build: 
easy, some epoxy experience useful

We designed a simple to build work boat with a vee-hull based on a proven work boat type, the Panga.

Rustica 570

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

Rustica 570 is a cabin motor boat ideal for coastal cruising and camping. It’s particularly suitable for river tourism in protected waters. The shallow V hull, semi-displacement, is designed for an outboard motor hosted inside the cockpit with a...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

22'4" Dragonfly

Designer: 
Skill Level to Build: 
some experience required

The boat is nice to row - a good combination of tippy enough for an intermediate, yet after a few days a novice will get the hang of it.

Penny Fee

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl...