Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Navcat Camper

Designer: 
NAVICULUS
Skill Level to Build: 
medium

Naviculus has teamed up with well known Australian Camper supplier Trayon to provide the camping experience on a boat. The boat is a simple open deck catamaran of wooden construction and with Torqeedo electric propulsion. The trayon camper can...

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...

Alden 21' Double-Ender

Designer: 
John Alden
Skill Level to Build: 
Advanced

A trim, rugged, carvel-planked cruiser with simple accommodations for two and a choice of gaff or marconi rig.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip Lofting is required...

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

37' 3" Yawl, Controversy 36

Designer: 
Mt. Desrt Yacht Yard
Skill Level to Build: 
Advanced

Designed for strip-planking, the Controversy 36 features light displacement and good headroom, with light and open space throughout.

Construction: Strip-planked over bulkheads and frames

Lofting is required.

Plans include 16...

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...