Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of WOOD hull material. And if you’re in the market for a boat to build, this is a fine place to start.

To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.

 

696 results for All Boat Plans & Kits

16' 6" Resolute

Designer: 
Steve Killing
Skill Level to Build: 
novice

Developed in response to requests from heavier and wider paddlers who also wanted a shorter boat, this stable load carrier is excellent for the novice kayaker.

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Ozona Pram

Designer: 
JF Bedard, AMRINA
Skill Level to Build: 
beginner

A stitch & glue tender that can be rowed, motored and that sails like a charm. Can be purchased as a kit or plans.

Kits are Okoume, Meranti or Sapele Marine plywood, CNC-cut in-house, in our facility outside of Tampa FL.

A...

20' Yawl, SALLEE ROVER

Designer: 
Samuel S. Crocker
Skill Level to Build: 
Advanced

A handy clipper-bowed centerboard yawl, this boat is a heavily built, smart sailor with sparten accommodations for two.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting...

PRAM 220

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

Designed for a boat owner who wanted a rigid tender for his 24’ meter yacht, PRAM 220 has the minimum dimensions to be used at this scope. It may be used by children for sailing in protected waters.

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...