Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Lion 600

Designer: 
Unik Yachts

600 Lion Yacht project despite its small size, has a spacious interior, and allows you to comfortably make trips to the inland waters and coastal seas.

The yacht can be easily transported on a trailer behind a car, and it opens up the...

THALAS 16'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The length of the American Whitehall of the 19th century was between 13′ and 23′. 16′ was the most typical length and the boats were built for 2 or 3 rowers. The classical boat has been re-elaborated to make the design of the boat coherent with...

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
amateur

Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made,...

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction — Glued lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area — Lug 83 sq. ft. Sloop 95 sq. ft.

Sirene du Saloum

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
expert

We have been totally inspired by the traditional, beautiful and extraordinarily functional Senegalese pirogues for the design of the hulls of the SIRENE DU SALOUM. The building technique is the stitch and glue, it's new to Senegal where the...

Pulling Boat, LIZ

Designer: 
Ken Bassett
Skill Level to Build: 
Advanced

Elegant, high-performance, sliding-seat pulling boat designed to mitigate the speed-robbing pitching associated with some sliding-seat craft.
Construction: Lapstrake planked over steamed frames.
Alternative construction: Cold-molded,...

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.