Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Kalostyn

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Kalostyn was designed as the subject matter of a book that I had planned to write called, How to design a boat using SketchUp 3D software.

I created a design that had lots of curves in order to demonstrate how to put these...

22'6 Kingfisher Shell

Designer: 
Graeme King
Skill Level to Build: 
Intermediate

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

ZEN

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Beaver Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

D'ANNA

Designer: 
Doug Hylan
Skill Level to Build: 
advanced

D'ANNA is a 30' cold-molded evolution of the 29' Beals Island lobster boat, DIANA

32' Lobstercruiser

Designer: 
Alan McInnis
Skill Level to Build: 
Advanced

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include...

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....

Bezier 12.5

Designer: 
Dennis Schaffer
Skill Level to Build: 
Average

The design objective of the “Bezier 12.5” was to achieve the beauty and style of a classic day sailor using aluminum as the construction material. This curvy true round hull was designed using the latest computer technology and built using...