Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Peeler Skiff

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

Designed by John C. Harris, this light but sturdy fishing and utility skiff—a “crab skiff,” as they’re known on the Chesapeake Bay—has been dubbed the “Peeler” after the Chesapeake slang for a local delicacy, soft-shell crabs. “There are so many...

Jericho Bay Lobster Skiff

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Designed by Joel White, the original boat was built plank-on-frame by Jimmy Steele (of Peapod fame), but no plans were ever drawn-until now.

Tom Hill and Eric Dow have taken lines off the original boat and Tom built the prototype and has...

ROBERTS 39 POWER SAILER

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

These catamarans were designed to be built using the fibreglass panel construction techniques. The method is very simple to use and perfect for the inexperienced builder. All of the developing is done

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

Linnet

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The LINNET is a seaworthy rowing boat that has been specifically designed for sea use. Accordingly it does not have outriggers or a sliding seat while a small daggerboard is fitted to help prevent being blown sideways by the wind. A good load...

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

Petrel 28

Designer: 
Cristian Pilo
Skill Level to Build: 
beginner to intemediate

A smart sturdy fast paced cruiser; huge interiors for a 8.80 LOA boat, good performance under sail, a very good handling and seaworthy boat even in rough conditions; round hull construction in plywood & epoxy , plans are higly detailed and...

16' Gentleman's Runabout

Designer: 
Nelson Zimmer & John Hacker
Skill Level to Build: 
Advanced

A low-power, moderate-speed inboard runabout for protected waters. Designed for sawn frames and batten-seam planking.

Construction: Battened-seam planking over sawn frames. Lofting required. Plans include 5 sheets.

Please note:...