Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Jimmy Skiff

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Before the advent of the outboard motor, rowing/sailing skiffs were common on Chesapeake Bay. They were used for crabbing, fishing, transporting goods, and enjoying summer evenings with a friend.

Half Model Plan SCHEMER

Designer: 
Isaac P. Wilkins
Skill Level to Build: 
Basic to Intermediate

Late 19th-century skimming-dish sloop designed by Isaac P. Wilkins.

Said to have been the most intelligently designed of the extreme skimming-dishes, she had a wide, shoal hull fitted with a centerboard and a huge press of sail.

...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Old Gaffer

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Moderate

18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur...

Workstar 640 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Advanced - welding skills in aluminium

An update of the traditional garvey, the Workstar 640 is a capable and proven small workboat, all-welded construction from marine aluminium alloy and extrusions. The Workstar 640 was designed by Rob Humphreys Yacht Design and put into production...

SANPIERA

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

SANPIERA is a re-elaborated version of the Sanpierota, a traditional boat of the Venetian lagoon which shows many particular and interesting features.

Zip

Designer: 
Glen L Marine
Skill Level to Build: 
beginner

A 14' Classic Style Runabout