Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Point Comfort 18

Designer: 
Doug Hylan
Skill Level to Build: 
beginner

Here is another little skiff inspired by a Chesapeake Bay working craft. In order to combine chine construction with the kind of bow that can punch into (instead of being punched around by) the Bay’s notorious chop, builders there have long used...

MicroCatboat

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The design of the boat comes by request of a customer who already owns a Charles W. Wittholz’s catboat and wanted to have a beautiful tender for his yacht. We designed, therefore, a small dinghy of only 2.6 meters with simple and elegant lines,...

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

Skoota 28

Designer: 
Woods Designs
Skill Level to Build: 
average

The Skoota 28 is a 28 ft plywood demountable coastal cruising power catamaran for a couple. Ideal for the European canals, the PNW or the Great Loop. It will demount for transport on a flat bed lorry/truck or could even be towed by a large car...

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.

Babson 14

Designer: 
Tom Hill and Jon Wilson
Skill Level to Build: 
Advanced

Build the Babson 14 from scratch! Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.

Plans contain 16 sheets of drawings, full-sized mold patterns so no...