Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

K-6m

Designer: 
Paul Kotzebue
Skill Level to Build: 
Intermediate

36 ft Daysailer / Overnighter based on the International 6 Metre class sailing yacht.

ROBERTS 341

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 341 (CANOE STERN) Fiberglass plans and frame patterns Over 100 of this fine cruising sailboat are in service world-wide. Designed for those of you that are looking for the sea going qualities

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Lone Star Twelve Rowboat

Designer: 
victory studios
Skill Level to Build: 
moderate

Lone Star Twelve rowboat, built using traditional methods, but with marine plywood for a leak free low maintenance hull. No lofting required. Includes measurements for station molds, transom, construction details and full size stem pattern....

20' Bangor Packet

Designer: 
Joel White
Skill Level to Build: 
Advanced

Lightweight, reasonably seaworthy recreational single with a sliding seat and outriggers.

Construction: Cold molded

Lofting is required

Plans include 5 sheets.

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

Sea Kayak SEGUIN

Designer: 
Rob Bryan
Skill Level to Build: 
Basic to Intermediate

Fast and slim, Seguin’s 21 1/2″ beam will challenge and reward experienced paddlers.

Built of 4mm plywood, this hard-chined, stitch-and-glue sea kayak includes a retractable skeg that will provide balance and control.

...