Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

65 ft Trawler

Designer: 
R.C.Johnston
Skill Level to Build: 
Professional

This is a well tested design for long range ocean passages. It has a heavy steel hull and aluminum superstructure. Propulsion is by twin Cat engines driving open props protected by heavy skegs.

20' Yawl, SALLEE ROVER

Designer: 
Samuel S. Crocker
Skill Level to Build: 
Advanced

A handy clipper-bowed centerboard yawl, this boat is a heavily built, smart sailor with sparten accommodations for two.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting...

Tricky Five

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it...

Lynx

Designer: 
Mike Camp
Skill Level to Build: 
advanced

The 24-foot Lynx was designed as the smallest boat with which a couple could contemplate an ocean voyage. The hull is a multi-chine hull to make it easy to build in flat plate steel. There are two chines. The sheer shows a strong spring and it...

VOYAGER DS 655

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

VOYAGER DS 655 WOOD / EPOXY, Fiberglass or Steel.

The cockpit extends from inside the 'dog house' with 5 ft sitting headroom though to near the transom as shown. Engine is under the dog house.

NAVCAT RIVER FERRY

Designer: 
Naviculus
Skill Level to Build: 
medium

A small river ferry has been designed to transfer up to 60 passengers.

The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.

The design is using the torqeedo electric motor concept...