Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
amateur

Simplicity of construction, user friendliness (both for single or double) and high performance – all of this with reasonable costs. These are the main priorities which lie at the base of the DP 14’ design and which justify the main choices made,...

Malabar II

Designer: 
John Alden
Skill Level to Build: 
advanced

An oceangoing auxiliary cruiser featuring stout but simple carvel construction.

Construction: Carvel planked over steamed frames

Lofting is required

Plans include 5 sheets.

Quattro 16

Designer: 
Woods Designs
Skill Level to Build: 
basic

a 16ft ply/epoxy beach cat available as plans from the designers or from Wooden Boat magazine

Babson 14

Designer: 
Tom Hill and Jon Wilson
Skill Level to Build: 
Advanced

Build the Babson 14 from scratch!

Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.

Plans contain 16 sheets of drawings, full-sized mold...

Pax 18

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

These completely new designs were developed at CLC in response to a growing constituency of skilled paddlers seeking waterborne sports cars for racing, exercise, or just plain fun.

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

Catboat

Designer: 
Andrew Walters
Skill Level to Build: 
Advanced

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.

I decided to design one with the aim of building it...

Penny Fee

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl...