Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

833 results for All Boat Plans & Kits

Rifleman

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking skills

Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing. She is built of plywood and is intended for 15/20 hp outboard motors.

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

13' 4" Melonseed skiff

Designer: 
Marc Barto
Skill Level to Build: 
Intermediate

Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.

Construction: Lapstrake plywood planking over steam-bent frames.

Alternative construction: Cold-molded or...

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

ONDINA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

ONDINA is a kayak designed with little compromise and destined to those who wish to experience long excursions at sea, it is pleasant to row, stable and, above all, fast.

Garvey 33

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

LOA: 33′ 1″
LBP: 32′10″
LWL: 26′ 8″
BEAM: 10′ 0″
DRAFT: 2′ 3½″/5′ 3½″
DISPLACEMENT: 9,000lbs (approx)
BALLAST: 2,000lbs lead under the settees.
1,000lbs additional lead for trim.
SAIL AREA: 388 sq. ft....