Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

13' 4" Melonseed skiff

Designer: 
Marc Barto
Skill Level to Build: 
Intermediate

Lapstrake-plywood daysailer with a shapely wineglass transom, unstayed sprit rig, and wide, flat, keels for easy trailering.

Construction: Lapstrake plywood planking over steam-bent frames.

Alternative construction: Cold-molded or...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

Luxemotor40

Designer: 
Nick Branson
Skill Level to Build: 
Moderate

The Luxemotor class is available at 40ft. A real little ship combining lots of accommodation within a small size. Easy of handling, lower running costs and reduced initial outlay are some of the benefits to this new design.

The design...

Hanze Yawl

Designer: 
Bert van Baar/Pepijn van Schaick
Skill Level to Build: 
intermediate

The Hanze Yawl was designed some years ago during a course on lofting at the Bootbouwschool in the Netherlands.

Bert van Baar, the owner of the school was very pleased about a Swedish design he had build previously in a project on the...

13' 7" MACGREGOR Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.

Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.

You’ll notice the different stem...

16' 0" Prospector

Designer: 
Ted Moores
Skill Level to Build: 
novice

The 16' Prospector features a flattened, shallow arch hull with its fullness carried into the bow and stern, good depth amidships to maintain freeboard and deepened ends to keep paddlers and gear dry.

FireBug

Designer: 
John Spencer/Peter Tait
Skill Level to Build: 
Beginner/any level

The FireBug is a small sailboat or yacht that you can amateur build at home, sailing club or school, then learn to sail. It's easy to sail and will be the fastest boat on the bay. Low cost too!

Pucan cutter

Designer: 
Nick Branson
Skill Level to Build: 
intermediate

Being a big fan of the Irish Pucan and I’m hoping to make building in wood both simpler and more straightforward. An encouragement for builders to have a go at building their own boat. https...