Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

831 results for All Boat Plans & Kits

18' 6" Redwing

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate

Redwing- a gentle, shoal-draft, low-powered
(5 to 10-hp), sheet-plywood outboard cruiser - can live on her trailer.

Whenever you wish, she'll be ready to go exploring.

Construction: Plywood planking over sawn frames, OR...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Albury Runabout

Designer: 
Albury Brothers / plans by Doug Hylan
Skill Level to Build: 
Intermediate to Advanced

Built by eye in the Bahamas for the last 40 years, Doug Hylan’s drawings allow for strip-planking or cold-molding.

Construction: Strip-planked over laminated frames.

Alternative construction: Cold-molded, plans included.

...

25' Bassboat

Designer: 
Eldredge-McInnis
Skill Level to Build: 
Advanced

Safe, dry, fast, and seaworthy V-bottomed inboard powerboat designed for carvel planking.

Construction: Carvel planked over sawn frames.

Alternative construction: Strip

Lofting is required.

Propulsion: 6 cylinder 350...

Eastport Nesting Pram

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

Chesapeake Light Craft’s Eastport Nesting Pram shares its hull with the popular stock Eastport Pram dinghy, a champion 7′9″ yacht tender that can carry a decent load, rows and tows with ease, and sails beautifully. In this “nesting” version, but...

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.