Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

832 results for All Boat Plans & Kits

Zipper

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

Zipper is an 11 foot runabout based on designs of the 1950’s for Class ‘B’ stock utility racing boats by Hal Kelly and William Jackson.

This design differs from those of the period in that it is to be constructed in the 'Instant Boat'...

CAT 39 POWER / SAILER

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts CAT 39 - FIBERGLASS POWER SAILER

These catamarans were designed to be built using the fibreglass panel construction techniques. The method is very simple to use and perfect for the inexper

Half Model Plan PAPOOSE

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.

The plans produce a model that is 22″ long.

You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and...

Milford 20

Designer: 
Neville Watkinson & Mark Fitzgerald
Skill Level to Build: 
Intermediate

The Milford 20 is a trailer-able shoal draft sharpie schooner modelled on the New Haven sharpies of the late 19th. century. It was inspired by Mark Fitzgerald’s FLORIDAYS design, as published in Reuel Parker’s Sharpie Book and featured in...

Cooper Jr. - RYD-22.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced, because of size

Copper Jr. is a extended cabin V bottom power cruiser. Her general qualities permit very economical cruising in comfort with modest power requirements. Taped seam, plywood construction.

Skoota 28

Designer: 
Woods Designs
Skill Level to Build: 
average

The Skoota 28 is a 28 ft plywood demountable coastal cruising power catamaran for a couple. Ideal for the European canals, the PNW or the Great Loop. It will demount for transport on a flat bed lorry/truck or could even be towed by a large car...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Riva Scoiattolo

Designer: 
Classic Wooden boat Plans-Riva 1953 original paper plans

At 14 feet this is Riva’s only outboard powered design. Originally designed in the 1950s, only some 150 were ever produced. A very rare outboard with limited images of original examples anywhere.

The Scoiattolo is complete with flooring...

Willow Sea Kayak

Designer: 
Bill Thomas
Skill Level to Build: 
beginner/intermediate

The Willow is ideal for day paddles, but has the volume and solid performance required of a true expedition kayak. Featured in a how to build article in WB #195-197, taught at the WoodenBoat School.