Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...

Seagull

Designer: 
John Welsford
Skill Level to Build: 
Very simple

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

Peeler Skiff

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

Designed by John C. Harris, this light but sturdy fishing and utility skiff—a “crab skiff,” as they’re known on the Chesapeake Bay—has been dubbed the “Peeler” after the Chesapeake slang for a local delicacy, soft-shell crabs. “There are so many...

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.

Deep V Inboard - Donzi Inspired

Designer: 
Classic Wooden Boat Plans
Skill Level to Build: 
Begginer

Based on the Donzi Sweet 16, this little treasure boasts a generous deep V at the transom allowing for smoother running and bad weather handling. Available as an outboard and inboard it an easily tow-able boat that will bring you home and take...

Imp

Designer: 
Glen L Marine
Skill Level to Build: 
beginner

A 10' Flat Bottom Powerboat/Rowboat

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

Switzer Bullet 136

Designer: 
Switzer-Craft - Classic Wooden Boat Plans
Skill Level to Build: 
Beginer

Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.

A low riding speedster able in calm or rough water. This is our only reverse engineered plan due to a factory fire...