Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

Alden 21' Double-Ender

Designer: 
John Alden
Skill Level to Build: 
Advanced

A trim, rugged, carvel-planked cruiser with simple accommodations for two and a choice of gaff or marconi rig.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip Lofting is required...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Switzer Bullet 136

Designer: 
Switzer-Craft - Classic Wooden Boat Plans
Skill Level to Build: 
Beginer

Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.

A low riding speedster able in calm or rough water. This is our only reverse engineered plan due to a factory fire...

Chester Yawl

Designer: 
John C. Harris
Skill Level to Build: 
Intermediate

Traditional "Whitehall" elegance in a stitch-and-glue kit. For casual single and tandem rowing, we do not believe there is a better build-your-own-boat kit than the Chester Yawl.

Skerrieskiff 17'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

K-6m

Designer: 
Paul Kotzebue
Skill Level to Build: 
Intermediate

36 ft Daysailer / Overnighter based on the International 6 Metre class sailing yacht.

Sherpa

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking

High capacity yacht tender with sailing ability. Exceptional stability, suited to beginner boatbuilders