Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Cooper Jr. - RYD-22.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Experienced, because of size

Copper Jr. is a extended cabin V bottom power cruiser. Her general qualities permit very economical cruising in comfort with modest power requirements. Taped seam, plywood construction.

Penny Fee

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake plywood.

Alternative construction - Traditional, cold-molded and strip plank.

No Lofting required.

Plans include 8 sheets.

Sail Area - Lug 87 sq. ft.

Sloop 104 sq. ft.

Yawl...

Long Lake

Designer: 
Dave Kuperstein
Skill Level to Build: 
beginner

Light and fast, a 20' tortured plywood, decked dayboat: both a double kayak and a single scull in one hull. Her 'midship' section is similar to Aleut kayaks.

Catboat Tom Cat

Designer: 
William Garden
Skill Level to Build: 
Advanced

Tom Cat is a shoal draft catboat of plank-on-frame construction, but strip construction would do as well.

Lofting is required.

Sail area is 120 sq. ft.

Plan includes 9 sheets.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Guillemot

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake clinker plywood. Alternative construction: Traditional plank, cold molded and strip plank.

Sail Area: Lug 62 sq. ft.
Gunter sloop 72 sq. ft.
No Lofting required.
Plans include 6 sheets.