Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

833 results for All Boat Plans & Kits

Catboat

Designer: 
Andrew Walters
Skill Level to Build: 
Advanced

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.

I decided to design one with the aim of building it...

CAT 39 POWER / SAILER

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts CAT 39 - FIBERGLASS POWER SAILER

These catamarans were designed to be built using the fibreglass panel construction techniques. The method is very simple to use and perfect for the inexper

owe 25

Designer: 
Francesco Belvisi
Skill Level to Build: 
medium

Owe 25 is an high performance sport boat.

The lower part of the hull is made from strip planking, the other parts are made from plywood and wood sandwich.

A boat simple and stiff, available in boat kit.

We can provide vpp...

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Li'l Longship

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

We are proud to introduce Li’l Longship, the latest addition to our extensive cradle boat fleet. Designed in the spirit of the classic Viking Longship, her sweeping lines and imposing figureheads embody the spirit of adventure and exploration...

Sharpie 31.5 EGRET

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

Sharpie 31.5′ EGRET

L.O.A.: 31′ 6 ½″
SPARRED LENGTH: 35′ 6″
L.W.L.: 26′ 3″
BEAM: 8′ 6″
DRAFT: 1′ 2 ¼″ /4′ 8″
SAIL AREA : (Depends on rig)
DISP.: 5,000# (approximate, for cruising)
BALLAST: 1,500 lbs....

DP 14'

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

The main priorities which lie at the base of the DP 14' design are: simplicity of construction, user friendliness (for single or double crew) and good performance - all of this with reasonable costs.

Stickleback Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic

Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.