Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

833 results for All Boat Plans & Kits

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

21' Pretty Marsh Runabout

Designer: 
Doug Hylan
Skill Level to Build: 
Intermediate to Advanced

21′ 2″ Inboard/outboard runabout, built of marine plywood.

Several design options include center console, outboard as well as inboard/outboard.

And, configurations also include different heights for the windshield.

...

WITTHOLZ Angler

Designer: 
Charles Wittholz
Skill Level to Build: 
Intermediate to Advanced

A big, healthy, open skiff with sophisticated lines. Construction: Strip planking over sawn frames; double diagonal bottom. Alternative construction: Plywood lapstrake topsides. Lofting is required. Plans include 6 sheets

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Eider

Designer: 
Sam Devlin
Skill Level to Build: 
intermediate

The Eider is a wonderful 17′ 3″ cabin sailboat. It is a great step up in size and function from the 15′ Nancy's China.

Her small cabin has good room to sleep two with a bit of extra space for gear to be stowed and not have to be moved...

Sharpie 24 Hampton Flattie

Designer: 
Reuel B. Parker
Skill Level to Build: 
Low to Moderate

24′ Chesapeake Bay Hampton Flattie

L.O.A.: 24′ 2″
L.W.L.: 22′ 8″
Beam: 7′ 9″
Draft: 2′ ½″/3′ 9″
Sail Area: 263 sq ft
Weight: 2,500# (approx)

Proportionately, this is the largest sharpie type known, and...

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

Half Model Plan MINERVA

Designer: 
William Fife, Jr.
Skill Level to Build: 
Basic to Intermediate

Cutter designed by William Fife Jr., in 1888.

The plans produce a model that is 28″ in length.

You’ll receive 3 pages of plans historical information about the boat, step-by-step instructions and full-sized patterns for each lift...