Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

FireBug

Designer: 
John Spencer/Peter Tait
Skill Level to Build: 
Beginner/any level

The FireBug is a small sailboat or yacht that you can amateur build at home, sailing club or school, then learn to sail. It's easy to sail and will be the fastest boat on the bay. Low cost too!

Yankee Tender

Designer: 
WoodenBoat
Skill Level to Build: 
Basic

Capacious, seaworthy, flat-bottomed skiff weighing less than 150 lbs. Construction: Cross-planked bottom, lapstrake sides. No lofting is required. Plans include 5 sheets.

Murphy - RYD-16.2

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
handy novice

RYD-16.2 is a wholesome dayboat that can be rigged as a free standing cat or sloop. Large, roomy cockpit, taped seam construction, centerboard and kick-up rudder.

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

Workstar Explorer

Designer: 
Rob Humphreys Yacht Design/Working Boats
Skill Level to Build: 
Basic

This is a refreshing new approach to kit boats. This is modern wooden boatbuilding. An update of the traditional garvey, the Workstar Explorer is handsome, fast, seaworthy and safe. Prefix System® kit boats are a very affordable way to get...

Papoose

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length....

Beaver Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

7' 7" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is included...