Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

845 results for All Boat Plans & Kits

NEREIDE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

NEREIDE is the classical canoe used on lakes or rivers of North America. For the last two centuries it has been built with very slight differences in shape, which is in itself a guarantee of quality.

Tricky Five

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The TRICKY FIVE has been conceived for a precise scope: to realize a boat, which in relation to its size would maximize the ratio between speed and cost. This means that for a determined cost for materials and hours of construction required, it...

Seagull

Designer: 
John Welsford
Skill Level to Build: 
Very simple

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Peace Canoe

Designer: 
John C. Harris
Skill Level to Build: 
Beginner/Intermediate

A great family boatbuilding project! Build it in a weekend from a kit, or build it from plans using local materials.

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

Papoose

Designer: 
Warren Jordan
Skill Level to Build: 
Beginner

This charming addition to our cradle boat fleet is adapted from a type known as a pram. Prams have transoms at both bow and stern, and are used extensively as tenders for larger vessels because of their roominess in a relatively short length....

Skerrieskiff 15'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued lapstrake clinker plywood.
No Lofting required.
Plans include 5 sheets with instructions.
Sail Area - 60 sq. ft.