Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Auklet 7' 2"

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Glued lapstrake plywood. Alternative construction: Traditional plank, cold-molded and strip planked. No Lofting required. Sail Area : 30 sq. ft. Plan includes 6 sheets.

Titicat

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

TITICAT is a 9-meter sailing catamaran designed with a modern style for the transport of tourists and to build in strip planking. It was designed to sail on Lake Titicaca (Bolivia). As you can see from the drawings and photographs the TITICAT is...

Luxemotor40

Designer: 
Nick Branson
Skill Level to Build: 
Moderate

The Luxemotor class is available at 40ft. A real little ship combining lots of accommodation within a small size. Easy of handling, lower running costs and reduced initial outlay are some of the benefits to this new design.

The design...

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

COASTWORKER 25

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Coastworker 25 Plans and patterns available for building in either Steel, Aluminum, Fiberglass or Wood Epoxy

Noank Pulling Boat

Designer: 
Nick Schade
Skill Level to Build: 
Intermediate

The Noank Pulling Boat is an 18′ x 36″ [5.5m x 91cm] sliding seat rowing boat suitable for open water travel. It has two large floatation chambers that can store a massive amount of gear if you should wish to go for an expedition.

This...

Coot

Designer: 
Nick Schade
Skill Level to Build: 
easy

The Coot is a handy little yacht tender with a lot of capacity. The “pram” style design has transoms at boat ends, this provides a lot of capacity in a short length and has the added benefit for the first-time wooden boat...

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...