Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

ZEN

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

ZEN is a very simple 10 Foot boat (www.diecipiedi.it) particularly narrow and therefore unstable. It is not the right boat for a beginner but, in the hands of a good helmsman, it may be fast.

New York 32

Designer: 
Sparkman & Stephens

Design No. 125, the NY 32s have stood the test of time with two-thirds of the original fleet still sailing and remains competitive.

Sharpie 31.5 EGRET

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

Sharpie 31.5′ EGRET

L.O.A.: 31′ 6 ½″
SPARRED LENGTH: 35′ 6″
L.W.L.: 26′ 3″
BEAM: 8′ 6″
DRAFT: 1′ 2 ¼″ /4′ 8″
SAIL AREA : (Depends on rig)
DISP.: 5,000# (approximate, for cruising)
BALLAST: 1,500 lbs....

Fox 16' Sloop LIVELY

Designer: 
Uffa Fox
Skill Level to Build: 
Advanced

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

Rifleman

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking skills

Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing. She is built of plywood and is intended for 15/20 hp outboard motors.