Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Half Model Plan PAPOOSE

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Cutter designed by Edward Burgess in 1887, and the inspiration for the 40′ class.

The plans produce a model that is 22″ long.

You’ll receive 3 pages of plans, historical information about the boat, step-by-step instructions and...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

START 65

Designer: 
ACDesign
Skill Level to Build: 
beginner

This is a boat simple to build, economical to use and that has a minimum of habitability and a lot of deck space for outdoor living.

The construction method is the “stitch and paste” because of its small size.

The hull is in CPM...

Whilly Tern

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate

Construction - Glued lapstrake clinker plywood.

No Lofting required.

Plans include 5 sheets with instructions.

Sail Area - Lug 83 sq. ft.

Sloop 95 sq. ft.

Sharpie 24 Hampton Flattie

Designer: 
Reuel B. Parker
Skill Level to Build: 
Low to Moderate

24′ Chesapeake Bay Hampton Flattie

L.O.A.: 24′ 2″
L.W.L.: 22′ 8″
Beam: 7′ 9″
Draft: 2′ ½″/3′ 9″
Sail Area: 263 sq ft
Weight: 2,500# (approx)

Proportionately, this is the largest sharpie type known, and...

Pulsar 33

Designer: 
Erik Lerouge

A trimaran is an interesting answer to the problems of a small offshore cruising multihull.

The flared main hull has accommodation similar to a monohull with a real double cabin, dinette, standing headroom at the galley, toilets and...

Tolman Skiff Standard

Designer: 
Renn Tolman
Skill Level to Build: 
beginner-intermediate

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or...

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...

Lion 600

Designer: 
Unik Yachts

600 Lion Yacht project despite its small size, has a spacious interior, and allows you to comfortably make trips to the inland waters and coastal seas.

The yacht can be easily transported on a trailer behind a car, and it opens up the...