Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Imp

Designer: 
Glen L Marine
Skill Level to Build: 
beginner

A 10' Flat Bottom Powerboat/Rowboat

Catboat

Designer: 
Andrew Walters
Skill Level to Build: 
Advanced

In the winter of 2012 a very good friend leant me an old copy of Nautical Quarterly. An article about Catboats caught my attention — I was and still am taken by their beautiful lines.

I decided to design one with the aim of building it...

Williams 24' Gaff Yawl

Designer: 
Fenwick C. Williams
Skill Level to Build: 
Advanced

A simple, spacious, singlehanded cruiser designed for carvel construction.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans include 7 sheets...

Workstar 17 Workboat

Designer: 
Rob Humphreys Yacht Design/Working Boats UK Ltd
Skill Level to Build: 
Basic

The Workstar 17 Workboat is an epoxy and plywood small garvey workboat, kit-built using the Prefix CAD/CAM System® of design and construction: designed by Rob Humphreys Yacht Design and put into production by Working Boats UK Ltd in the early...

Seagull

Designer: 
John Welsford
Skill Level to Build: 
Very simple

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

Tolman Skiff Jumbo

Designer: 
Renn Tolman
Skill Level to Build: 
intermediate

Tolman Skiffs are thoroughly modern, ocean capable, vee bottom stitch and glue plywood boats with a dory ancestry. These skiffs are designed for Alaskan waters and are ideal for sport fishing, beach camping, cruising and general work or...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...