Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Skerrieskiff 17'

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction - Glued Lapstrake clinker plywood. No Lofting required. Plans include 5 sheets with instructions. Sail Area - 67 sq. ft.

Wynfall

Designer: 
Mark Smaalders
Skill Level to Build: 
moderate

26' Bermudan or gaff-rigged cutter for construction in wood and epoxy

18' 8" Mackinaw

Designer: 
Nelson Zimmer
Skill Level to Build: 
Intermediate to Advanced

An open shoal-draft centerboarder suitable for rowing, daysailing, or coastal cruising.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake, strip, or cold-molded

Lofting is required

...