Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Sharpie 24 Hampton Flattie

Designer: 
Reuel B. Parker
Skill Level to Build: 
Low to Moderate

24′ Chesapeake Bay Hampton Flattie

L.O.A.: 24′ 2″
L.W.L.: 22′ 8″
Beam: 7′ 9″
Draft: 2′ ½″/3′ 9″
Sail Area: 263 sq ft
Weight: 2,500# (approx)

Proportionately, this is the largest sharpie type known, and...

Ashes Solo Day

Designer: 
Trevor Paetkau - Ashes Still Water Boats
Skill Level to Build: 
Suitable for amateur builders

The Solo Day is simple. She’s light, easily carried, and not for the fussy. Best results will be obtained if the builder can curtail the urge to use fancy marquetry, or exotic woods. Built as designed she will weigh as little as 30 pounds, will...

15' 3" / 16' 2" Freedom Solo

Designer: 
Steve Killing
Skill Level to Build: 
novice

Freedom 15′3″ or 16′2″ — modern efficient pleasure canoe. The Freedom Solo is the result of a unique project initiated in the spring of 2006. Steve Killing had been considering a new solo tripping canoe design and, coincidentally, discussions on...

MULTI 5

Designer: 
ACDesign
Skill Level to Build: 
beginner

The Multi 5 is a multihull with a simple construction and good performance. The construction is extremely simplified by the drift absence. The good hulls volume allows to spend pleasant days and moving along the coasts with other friends, having...

Dace - RYD-8.4

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
novice

Dace - RYD-8.4 is a fat little yacht tender. Originally designed for carrying quite a load to and from a buddy’s 40′ yacht.

Fox 16' Sloop LIVELY

Designer: 
Uffa Fox
Skill Level to Build: 
Advanced

Lively, fast, planing racer/daysailer. Construction: Double-diagonal planking over steamed frames. Alternative construction: Cold-molded. Lofting is required. Plans include 4 sheets.

ROBERTS 432

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 432 - STEEL, ALUMINUM OR FIBERGLASS

This design was drawn to replace the earlier Mauritius 43 and Norfolk 43 plans.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...