Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Sandy

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

Sandy was designed for extended coastal cruising in such areas as the east coasts of the U.S. or Australia, the Pacific Northwest, or Europe. Conditions in coastal waters can vary enormously, and include a range of conditions including storms,...

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...

PALOMA OPEN

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

PALOMA is a simple, traditional and versatile boat which has been designed in three versions, as a small cruiser, as an open daysailer and as a motorboat.

Mill Creek 16.5 Hybrid

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Intermediate/ Advanced

The Mill Creek 16.5 Hybrid combines the best qualities of stitch-and-glue plywood kayaks with the beauty of a cedar strip deck to create a wonderful high volume tandem kayak

JUNIOR

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

JUNIOR, designed to compete in Diecipiedi (10 Foot) Class (www.diecipiedi.it), is norrower and therefore less stable than other boats but it is one of the fastest monohulls of the class.

15' 0" Freedom 15

Designer: 
Steve Killing
Skill Level to Build: 
novice

Like its sisterships, the Freedom 15 features an asymmetrical hull with a fine bow and slightly fuller stern. Great for camping, day trips, fishing and just playing around.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.