Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

Pulsar 36

Designer: 
Erik Lerouge
Skill Level to Build: 
Medium

A trimaran is a good choice for those who want to get very high performance on a cruising boat.
The flared main hull offers nice cruising accommodation with two large double cabins, a convenient dinette, standing headroom at the galley,...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

13' 9" Willy Winship

Designer: 
John Atkin
Skill Level to Build: 
Basic to Intermediate

Flat-bottomed sailing skiff. Plans options include cross-planked or plywood bottom.

Construction: Cross-planked bottom, lapstrake sides

Alternative constuction: Plywood, glued lapstrake plywood

Lofting is required

...

Babson 14

Designer: 
Tom Hill and Jon Wilson
Skill Level to Build: 
Advanced

Build the Babson 14 from scratch!

Plans include three variations on the hull: sheet ply (like our kits), glue-lap-ply, power, suitable for up to a 2 horsepower outboard.

Plans contain 16 sheets of drawings, full-sized mold...

Half Model Plan PETREL

Designer: 
John Hyslop
Skill Level to Build: 
Basic to Intermediate

Cutter designed by John Hyslop in 1876.

An early combination of English and American ideas, PETREL was designed according to the wave form theory.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

17’ Kayak, Endeavor

Designer: 
Steve Killing
Skill Level to Build: 
Intermediate

Steve Killing’s design is fast becoming well-known, in part due to the Endeavour being build in many a WoodenBoat School class, as well as being the featured boat in the Ted Moores book Kayakcraft.

This is the boat for you, even if you...

Shearwater 16

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need