Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

NAVCAT RIVER FERRY

Designer: 
Naviculus
Skill Level to Build: 
medium

A small river ferry has been designed to transfer up to 60 passengers.

The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.

The design is using the torqeedo electric motor concept...

30' Malabar Jr

Designer: 
John Alden
Skill Level to Build: 
Advanced

Carvel-planked, outside ballasted cruiser with choice of three or four berths.

Construction: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Sail Area : Sloop - 528 sq. ft., Yawl - 579 sq....

Beaver Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Construction: Strip planked and glass/epoxy sheathed.

Alternative construction: Cold molded, traditional wood and canvas lapstrake plywood.

No Lofting required.

Plans include 4 sheets.

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...

Sail Kit for kayaks

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.

It’s designed with two variants: one adaptable to Naiade and Ondina (version A), and the other...

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...