Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...

Mini Skeeter Iceboat

Designer: 
John Eisenlohr
Skill Level to Build: 
medium

The Mini Skeeter was made primarily as a fun leisure iceboat that I could use on smaller lakes. The goal I was aiming for is a small, comfortable, warm iceboat that looks elegant. The fuselage is about slightly more than10′ long. The beam is 82...

Sherpa

Designer: 
John Welsford
Skill Level to Build: 
Beginner to Intermediate

Harbor Woodworks offers custom kits and boats, tailored to your specifications and desired level of completion. We ship to the U.S. and Canada.

Some of John's comments follow --

“Had an enquiry from a liveaboard couple who needed...

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

Sea Bright 38

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate (strip plank) to High (Cold-molded Lapstrake)

Parker Marine Enterprises—Sea Bright 38
Length Over All: 37′ 11”
Beam: 10′ 6″
Draft: 2′ 4″
Displacement: 9,500 lbs, half-laden (approximate)
Power: Yanmar 4JH4HTE (110 hp int/99 hp cont)
Water: 200 gallons
Fuel...

Alden 21' Indian Class

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A Swampscott dory-type daysailer with generous side decks and inside ballast.

Construction Method: Lapstrake over sawn frames

Lofting is required: Partial

Plans include 4 sheets.

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.