Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

NAIADE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

NAIADE is a little bit shorter than classical sea kayaks but it is perfectly suitable for pleasure trips in calm waters, under safe conditions, even for amateur paddlers.

MIA 15

Designer: 
Andrew Walters
Skill Level to Build: 
Beginner

Mia was the second design that I published, a 12′ runabout, inspired in part by William Jackson's 1955 design for the “Ace” which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com), and in part by the 1950’s designs of...

Shellback Sailing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is now included with the...

ROBERTS SPRAY 38

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

Spray 38 - STEEL PLANS & FRAME PATTERNS Over 100 examples of this design can be found cruising in various parts of the world. Specially designed for Multi Chine Steel Construction only this Spray

Panga25

Designer: 
Jacques Mertens
Skill Level to Build: 
easy, some epoxy experience useful

We designed a simple to build work boat with a vee-hull based on a proven work boat type, the Panga.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...