Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Thomson 11' Skiff

Designer: 
Asa Thomson
Skill Level to Build: 
Intermediate

Flat-bottomed rowing skiff elegant enough for a yacht tender.

Construction: Cross-planked bottom, lapstrake sides

No lofting is required

Plans include 1 sheet.

Riva Scoiattolo

Designer: 
Classic Wooden boat Plans-Riva 1953 original paper plans

At 14 feet this is Riva’s only outboard powered design. Originally designed in the 1950s, only some 150 were ever produced. A very rare outboard with limited images of original examples anywhere.

The Scoiattolo is complete with flooring...

Skana

Designer: 
Orca Canoes & Kayaks Ltd.
Skill Level to Build: 
novice

Skana is a single cockpit, wood strip kayak designed for multi-day use. The design is 17'4 in LOA with a max beam of 24". It has moderate rocker with average volume.

K-8m

Designer: 
Paul Kotzebue
Skill Level to Build: 
Advanced

48 foot Sailing Yacht based on the International 8 meter class.

Half Model Plan MADGE

Designer: 
George L. Watson
Skill Level to Build: 
Basic to Intermediate

British plank-on-edge cutter designed by George L. Watson in 1879.

The plans produce a model that is 23″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions and full-sized...

IDEA19

Designer: 
Dudley Dix and Cristian Pilo
Skill Level to Build: 
beginner to intermediate

A sparkling 20 foot trailerable club racer; generous sailplan with a heavy roached full-battened mainsail, an easily manageable jib, an on-deck bowsprit with a fractional or masthead gennaker; IDEA 19 has a very good pace upwind and amazing...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Chesapeake Double

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The success of the proven Chesapeake™ hull shape led quickly to demands for similar tandem and three-person designs. The Chesapeake Double™ and Triple™ are high-volume touring boats, with a 700lb payload that belies their surprising speed. Even...