Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Shearwater 14

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need

32' Lobstercruiser

Designer: 
Alan McInnis
Skill Level to Build: 
Advanced

Round-bottomed, carvel-planked powerboat with two berths and a single 300-hp engine.

Construction: Carvel planked over steamed frames.

Alternative construction: Strip or cold-molded

Lofting is required.

Plans include...

Half Model Plan NYMPH

Designer: 
Edward Burgess
Skill Level to Build: 
Basic to Intermediate

Keel/centerboard cutter designed by Edward Burgess in 1888 and first of his “Compromise 40-footers”.

The plans produce a model that is 25″ long.

You’ll receive 4 pages of plans historical information about the boat and step-by-...

BLUEMOTION 550

Designer: 
Keith Callaghan
Skill Level to Build: 
Moderate

BlueMotion is a new 5.5m dayboat (or large dinghy) design for 2013. The design is a direct derivative of my Hazardous Zero-9 Merlin Rocket design, and has sufficient horsepower to provide a superb sailing experience, but with the reassurance...

22'6 Kingfisher Shell

Designer: 
Graeme King
Skill Level to Build: 
Intermediate

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

CAT 65 MOTOR SAILER

Designer: 
Bruce Roberts-Goodson
Skill Level to Build: 
AVERAGE SKILLS.

CAT 65 MS STEEL KIT or Cutting files and plans. Plans are also available for Aluminum or fiberglass construction. This catamaran was designed for personal use or charter work.

owe 25

Designer: 
Francesco Belvisi
Skill Level to Build: 
medium

Owe 25 is an high performance sport boat.

The lower part of the hull is made from strip planking, the other parts are made from plywood and wood sandwich.

A boat simple and stiff, available in boat kit.

We can provide vpp...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...