Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

827 results for All Boat Plans & Kits

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Riva Scoiattolo Replica 1950's

Designer: 
Orinally by Riva, converted to CAD by Classic Wooden Boat Plans
Skill Level to Build: 
Beginer to advanced

Riva’s only outboard designed in the early 50’s with a 25hp Evinrude. Some 140 models were built between 1950 and 1957. We have been fortunate enough to have received a good set of plans that cover all details enabling us to replicate this little...

Shearwater 16

Designer: 
Eric Schade
Skill Level to Build: 
Beginner/Intermediate

The Shearwater is an eye-catching, light and fast cruiser that does many things well. It is a strong contender for the budget-minded paddler looking to answer the 'if I could only have one kayak' need

Mill Creek 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

The Mill Creek 16.5™ is enormously popular because it can be used in so many ways. Not only can you paddle it as a single or a double, but you can sail it, or add a sliding-seat rowing unit.

KIS 4.0

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
medium

We designed KIS dinghies in order to meet a very practical need of amateur boatbuilders. Since they often find themselves in trouble in building masts, sails and rig of their boats and are likely to spend in these items much more than what they...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

GulfStream 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience

The GulfStream 28 is a moderate vee, relatively narrow boat (beam/length ratio of 3.4) designed to satisfy a program in which economy and seaworthiness were top priorities.