Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Half Model Plan WAVE

Designer: 
Cornelius Gorman
Skill Level to Build: 
Basic to Intermediate

Wide, shallow racing sloop designed by Cornelius Gorman in 1878. The plans produce a model that is 21″ long.

You’ll receive 3 pages of plans historical information about the boat and step-by-step instructions for half-hull building,using...

Old Gaffer

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Moderate

18′ double ended, auxiliary daysailer. Gaff rigged sloop with large cockpit and small cudy forward. Traditional carvel construction with outboard rudder and ballast keel. Many boat built to this design over the years including some by amateur...

12' Catspaw Dinghy

Designer: 
Joel White and N.G. Herreshoff
Skill Level to Build: 
Intermediate

An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake or strip

No lofting is required...

ROBERTS 341

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Roberts 341 (CANOE STERN) Fiberglass plans and frame patterns Over 100 of this fine cruising sailboat are in service world-wide. Designed for those of you that are looking for the sea going qualities

CURLEW

Designer: 
Peterson Associates Inc.
Skill Level to Build: 
Basic

26′ Auxiliary Ketch

Based on a traditional fishing vessel type called a “Cowhorn” this design features an inboard engine and ballast keel.

The arrangement provides two berths, a head and modest galley. The divided cockpit...

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

EURO COASTWORKER 1000

Designer: 
BRUCE ROBERTS-GOODSON

EURO 1OOO-Steel Kit or Cutting files & plans.

This is our smallest kit & this design is sure to find favour with the budget conscious builder. This semi-displacement hull capable of cruising at around 7 kts. The...

Rifleman

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking skills

Rifleman was intended as an economical planing hulled speedboat suited for coastal inshore fishing. She is built of plywood and is intended for 15/20 hp outboard motors.