Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Delfini

Designer: 
Andrew Walters
Skill Level to Build: 
Intermediate

This is the 19′ x 6′ version of Delfini with a semi flat bottomed hull, i.e. a narrow flat central portion with V’d bilge panels. This should give a reasonable compromise between economy and rough water ability and the flat central section...

COASTWORKER 36 WORKBOAT

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

NEW - COASTER Trawler Yachts & Work boats Here are the first of a new range of Coastal Trawlers that can customized to suit your desires and particular requirements. All will be excellent sea boat

20' Spalding Utility Launch

Designer: 
Eliot Spalding
Skill Level to Build: 
Intermediate to Advanced

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames...

NEREIDE

Designer: 
Paolo Lodigiani
Skill Level to Build: 
intermediate

NEREIDE is the classical canoe used on lakes or rivers of North America. For the last two centuries it has been built with very slight differences in shape, which is in itself a guarantee of quality.

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

26' Gaff Sloop

Designer: 
Wilder B. Harris
Skill Level to Build: 
Intermediate to Advanced

Shallow-draft, V-bottomed pocket cruiser with spartan accommodations for two.

Construction: Carvel planked over sawn frames

Alternative construction: Strip or plywood

Lofting is required.

Plans include 5 sheets.

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...