Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

853 results for All Boat Plans & Kits

ROI 44

Designer: 
ROI MATTY

The boat is high performance light weight 44 feet catamaran:
Hull weight -4.5 t

The catamaran Build kit contains:

  1. A set of DXF drawing ready to be sent to a cutting facility or set of plans for hand cutting made of 27
  2. ...

Sail Kit for kayaks

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
amateur

The Sail kit allows you to transform the canoes NINFA, NAIADE and ONDINA, in small sailing trimarans for coastal cruising with minimal efforts.

It’s designed with two variants: one adaptable to Naiade and Ondina (version A), and the other...

The Open Boat

Designer: 
Jim Flood
Skill Level to Build: 
Very low

This is a design for a basic hull made from one piece of closed cell foam 1m x 4m x 50mm thick. The trade name is Plastazote and there is a distributor in the USA.

The hull can be used to develop a rowing skiff, canoe, kayak or sailing...

13' 7" MACGREGOR Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.

Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.

You’ll notice the different stem...

Stickleback Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic

Construction: Glued lapstrake plywood. Alternative construction: Traditional planking, cold molded, strip plank, epoxy-fiberglass. No Lofting required. Plans include 5 sheets.

PALOMA SAILING

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
advanced

PALOMA is an open sailing boat for family excursions. It’s a simple traditional and versatile boat which has been designed in three version as a small cruiser, as an open daysailer and as a motorboa

Simon Watts Sea Urchin Dinghy

Designer: 
Sam Manning, Bill Nielsen, and Simon Watts
Skill Level to Build: 
Beginner

These handsome, practical row boats were routinely built by Nova Scotia shipwright, Jim Smith in six days, painted and ready for the water.

Simon Watts’ designs for these boats are a great way to get introduced to boatbuilding and rowing....

Sherpa

Designer: 
John Welsford
Skill Level to Build: 
Basic woodworking

High capacity yacht tender with sailing ability. Exceptional stability, suited to beginner boatbuilders