Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Sandy

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

Sandy was designed for extended coastal cruising in such areas as the east coasts of the U.S. or Australia, the Pacific Northwest, or Europe. Conditions in coastal waters can vary enormously, and include a range of conditions including storms,...

9' 6" Nutshell Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic

Our pre-cut kits have been cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease.

The ladder frame—the “foundation” of the boat—is...

ROBERTS 50

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

Roberts 50 - Canoe Stern Fiberglass World Cruising Sailboat. This design has appealed to many serious cruising sailors and there are many Roberts 50's in service worldwide. Although the design was pre

Silver 333

Designer: 
Paolo Lodigiani and Matteo Costa
Skill Level to Build: 
intermediate

The SILVER 333 is a very small classical runabout for one or two people which may easily be transported on top of a mid-size car roof. Maximum suggested power of the motor is 15/20 HP, which is sufficient for planing. The bow of the boat acts as...

22'6 Kingfisher Shell

Designer: 
Graeme King
Skill Level to Build: 
Intermediate

V-bottomed single shell with sliding seat, outriggers and light plywood construction.

Construction: Plywood planking over bulkhead-type frames.

No lofting is required.

Plans include 4 sheets.

Classic Delta 29'

Designer: 
P&F Yacht Design - Naval Architects
Skill Level to Build: 
Skilled

This retro styled powerboat was designed for weekend cruisers and fishing, her semi displacement hull offer seaworthy and sea kindly performance, good speeds with modest horsepowers.

Construction in Plywood/Epoxy. Plans are available in...

11' 2" Shellback Dinghy

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

This beautiful 11′ 2″ dinghy is similar in construction to the Nutshell Pram, although it is slightly larger, with a pointed bow.

Construction: Glued-lapstrake plywood.

Alternative construction: Traditional lapstrake.

No...

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...

Berry Point 26

Designer: 
Tad Roberts
Skill Level to Build: 
moderate

The Berry Point 26 was designed to fulfill a need for a traditionally stylish, trailerable, moderately fast, and capable family cruiser. She had to be shallow draft, economical to operate and simple.