Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Orca 21

Designer: 
Evan Gatehouse
Skill Level to Build: 
Beginner

A serious extended expedition touring kayak, double or triple, designed to carry a large load safely and with ample stability.

DragonFlyer 3.2 kit

Designer: 
John Brooks
Skill Level to Build: 
Beginner to intermediate

DragonFlyer 3.2 is a great boat for all ages to build. We built the first boat, Zip, with our four kids, then aged seven to twelve and they all had a great time and learned along the way. The kit includes precision-cut, high-quality marine...

MIA

Designer: 
Andrew Walters
Skill Level to Build: 
beginner

MIA is a 12 foot runabout, Her design is inspired by William Jackson's 1955 design for the 'Ace' which was produced by the Sande Boat Works between 1956 and 1962 (www.sandeace.com).

This design differs from those of the period in that it...

Shellback Rowing Kit

Designer: 
Joel White
Skill Level to Build: 
Basic to Intermediate

Our pre-cut kits are cut by computer-guided routers to provide you with extremely accurate parts. And, the kits come with just about everything needed except the elbow grease. The ladder frame—the “foundation” of the boat—is now included with...

Kahuna

Designer: 
Mark Smaalders
Skill Level to Build: 
Moderate

32' Bermudan or gaff-rigged cutter for construction in wood and epoxy

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Sharpie 31.5 EGRET

Designer: 
Reuel B. Parker
Skill Level to Build: 
Moderate

Sharpie 31.5′ EGRET

L.O.A.: 31′ 6 ½″
SPARRED LENGTH: 35′ 6″
L.W.L.: 26′ 3″
BEAM: 8′ 6″
DRAFT: 1′ 2 ¼″ /4′ 8″
SAIL AREA : (Depends on rig)
DISP.: 5,000# (approximate, for cruising)
BALLAST: 1,500 lbs....

Linnet

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The LINNET is a seaworthy rowing boat that has been specifically designed for sea use. Accordingly it does not have outriggers or a sliding seat while a small daggerboard is fitted to help prevent being blown sideways by the wind. A good load...