Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

835 results for All Boat Plans & Kits

Navigator

Designer: 
John Welsford
Skill Level to Build: 
Some woodworking skills helpful

Classic daysailing yacht of glued plywood lapstrake construction suitable for first time builders. Choice of sloop, yawl or lugsail rigs, carries up to six and is suitable for coastal cruising.

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been...

20' Spalding Utility Launch

Designer: 
Eliot Spalding
Skill Level to Build: 
Intermediate to Advanced

Rugged little launch with generous beam.

Construction features a traditional backbone of bolted-up oak, steam-bent frames and strip-planking. Four different arrangements are shown.

Construction: Strip-planked over steam-bent frames...

Mist

Designer: 
Karl Stambaugh
Skill Level to Build: 
Intermediate to Advanced

This cozy pocket cruiser combines simple sheet-plywood construction with more than a touch of elegance.

Her board-up draft of 1′6″ lets you explore secluded coves and is easy to haul with a trailer.

Construction: Plywood planking...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two