Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of WOOD hull material. And if you’re in the market for a boat to build, this is a fine place to start.

To refine your search, add quote marks. If you search Nutshell Pram Kit, you will get all the listings which include Nutshell, Pram, and Kit. To refine, search “Nutshell Pram Kit” and you’ll see just Nutshell Pram Kit results.

 

701 results for All Boat Plans & Kits

Sapphire 27

Designer: 
George Hisstock
Skill Level to Build: 
Reasonable woodworking skills

The Sapphire 27 is developed from our very successful Design No. 056, to give a more traditional cruising oriented layout both down below and on deck. Modifications include a little more freeboard, better headroom throughout, a simpler, more...

Pulling Boat, LIZ

Designer: 
Ken Bassett
Skill Level to Build: 
Advanced

Elegant, high-performance, sliding-seat pulling boat designed to mitigate the speed-robbing pitching associated with some sliding-seat craft.
Construction: Lapstrake planked over steamed frames.
Alternative construction: Cold-molded,...

Discrete - RYD-14.11

Designer: 
Paul "PAR" Riccelli
Skill Level to Build: 
Moderate

Discrete - RYD-14.11 is a popular little pocket cruiser. She's not to be confused with others her size, this is a little ship in every regard and fully self righting. This is the schooner version.

Sassafras 16

Designer: 
Chesapeake Light Craft
Skill Level to Build: 
Beginner/Intermediate

Like many traditional canoes, the Sassafras 16 is symmetrical, bow and stern. This allows a solo paddler to sit facing backwards on the forward seat for better trim. An elegant lapstrake canoe for two

18' Single Shell FIREFLY

Designer: 
Ken Bassett
Skill Level to Build: 
Basic to Intermediate

An entry-level sliding-seat pulling boat. Provides rewarding speed in an easily built hull with enough stability to keep a beginner out of trouble. Construction: Plywood. No lofting is required. Plans include 5 sheets.

Trixie

Designer: 
Andrew Walters

“Trixie” began as an idea for a small and simple to build plywood tender, able to get out to a mooring with two or three on board, that was very light, incorporated wheels to enable transport to the slipway, was designed to provide the maximum...

Romany 34 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
moderate

This is a larger version of my 28ft Gypsy sailing catamaran and is a 34′ offshore cruiser. It has essentially the same cuddy as Gypsy as that has proven a comfortable size for a couple and occasional guests. However the hulls are much larger and...