Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

The Tandem Ashes Day

Designer: 
Trevor Paetkau
Skill Level to Build: 
Suitable for amatuer builders

A Light and Elegant Tandem for Day Paddlers and Light Overnighters. Easily driven, with moderate rocker and good initial stability.

The Ashes Tandem Day is quick to come up to speed, she’s maneuverable, and she’s beautiful.

I...

Stradivari Mk IV

Designer: 
Hasse malmsten
Skill Level to Build: 
intermediate

This is a design for the 2.4mR class. The measurement formula is the same as for the bigger sisters like the famous 12mR yachts once used for the Americas Cup. As the down-scaling would leave the boat with to little righting moment there has been...

STRIP 39

Designer: 
ACDesign
Skill Level to Build: 
intermediate

The input was “design a pure cruising boat”.

The boat has wide internal volumes, limited draft, average/high displacement and sailing area which do not require a continuos sail change.

The hull lines have been developed both to...

Blue Pearl

Designer: 
Timothy F Anders
Skill Level to Build: 
Easy

Are you looking for a small boat that is easy to build and will blow your hair back on the water. Then this stitch and glue 11′ speed boat is for you.

This design has been quarter scale tested and I am starting construction on Serial...

Pixie 14 sailing catamaran

Designer: 
Woods Designs
Skill Level to Build: 
basic beginner

The 14ft PIXIE is an entry level car toppable beach cat that has proved extremely popular, with hundreds now sold worldwide. It has often been built by Scout groups or as school projects. WoodenBoat Store markets this design. The PIXIE hulls are...

SIRENETTA

Designer: 
Paolo Lodigiani
Skill Level to Build: 
beginner

SIRENETTA is a mini kayak conceived for young people, but it may be used also by adults. The flat bottom and the reasonably large beam make it safe and suitable for beginner canoeists.

Wynfall

Designer: 
Mark Smaalders
Skill Level to Build: 
moderate

26' Bermudan or gaff-rigged cutter for construction in wood and epoxy

ATHELAS

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

Athelas is a 17'-2" open water recreational rower for one or two based on a lines sketch by N. G. Herreshoff. Built from 6 and 9 mm glued lapstrake plywood, she weighs 81 pounds and can be cartopped