Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

859 results for All Boat Plans & Kits

Eider

Designer: 
Sam Devlin
Skill Level to Build: 
intermediate

The Eider is a wonderful 17′ 3″ cabin sailboat. It is a great step up in size and function from the 15′ Nancy's China.

Her small cabin has good room to sleep two with a bit of extra space for gear to be stowed and not have to be moved...

Switzer Bullet 136

Designer: 
Switzer-Craft - Classic Wooden Boat Plans
Skill Level to Build: 
Beginer

Our best seller the 13 1/2 foot Bullet by Switzer. Iconic lines, the Bullet was a marathon and record breaker in its time.

A low riding speedster able in calm or rough water. This is our only reverse engineered plan due to a factory fire...

Design No. 165

Designer: 
George Whisstock
Skill Level to Build: 
Some experience preferable – CNC version needs less experience than laminated version

A development from our very successful and popular Design No. 119 (17′6″ Pocket Cruiser) – a 19′4″ Pocket Cruiser in two basic versions:

Saloon version: good sitting headroom.

Doghouse version: decent standing headroom in the...

Tammie Norrie

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction — Glued lapstrake clinker plywood. Alternative construction —Traditional plank, cold molded and strip plank. No Lofting required. Plans include 7 sheets with instructions. Sail Area — Lug 65 sq. ft. Sloop 84 sq. ft. Yawl 81 sq. ft....

Half Model Plan PETREL

Designer: 
John Hyslop
Skill Level to Build: 
Basic to Intermediate

Cutter designed by John Hyslop in 1876. An early combination of English and American ideas, PETREL was designed according to the wave form theory.

You’ll receive 2 pages of plans historical information about the boat and step-by-step...

ROBERTS 39 POWER SAILER

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

These catamarans were designed to be built using the fibreglass panel construction techniques. The method is very simple to use and perfect for the inexperienced builder. All of the developing is done

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.