Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

832 results for All Boat Plans & Kits

Top Hat

Designer: 
Doug Hylan
Skill Level to Build: 
intermediate

Good speed and sea keeping ability with low impact & noise. 50hp outboard or inboard diesel.

Seagull

Designer: 
John Welsford
Skill Level to Build: 
Very simple

Simple sheet plywood sports rowing boat, stitch and tape construction. As easy to build as it gets!

ROBERTS 64

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

ROBERTS 64 - Steel or Aluminum or Fiberglass

This design was originally based on the very successful Roberts 53 and is assured of acceptance by those builders who require a larger boat.

Half Model Plan Hattie

Designer: 
Documented by Martin C. Erismann
Skill Level to Build: 
Basic to Intermediate

A working Friendship Sloop, or Maine sloop-boat, documented by Martin C. Erismann at the turn of the century. The plans produce a model that is 15″ long.

You’ll receive 2 pages of plans historical information about the boat and step-by-...

13' 7" MACGREGOR Canoe

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

Beamier, but no less elegant than the Wee Rob, this more stable double-paddle canoe can carry sail better.

Any of the three lengths (13′ 6″, 15′ 8″, or 17′ 3″) can be built using the same plans.

You’ll notice the different stem...

14' 10" Runabout, RASCAL

Designer: 
Ken Bassett
Skill Level to Build: 
Intermediate to Advanced

A modified V-bottom, with constant deadrise in its after sections. Construction: Plywood and Mahogany over sawn frames. Alternative construction: Cold-molded, double laminated plywood. No lofting is required. Plans include 8 sheets.

NAVCAT RIVER FERRY

Designer: 
Naviculus
Skill Level to Build: 
medium

A small river ferry has been designed to transfer up to 60 passengers.

The design is a catamaran of marine plywood construction using fibreglass/epoxy to connect the seems.

The design is using the torqeedo electric motor concept...

Goeller 12' Dinghy

Designer: 
Frederick Goeller
Skill Level to Build: 
Intermediate

Round-bottomed, transom stern, centerboard, 2-4 daysailing.

Contruction: Carvel planked over steamed frames

Alternative contruction: Lapstrake, strip or cold-molded

Lofting is required

Plans include 3 sheets