Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

854 results for All Boat Plans & Kits

START 90

Designer: 
ACDesign
Skill Level to Build: 
intermediate

We chose the 9.1 mt LOA not to overcomplicate its construction, but to facilitate the availability of a place to build this boat, and at the same time to have internal volume that allows a comfortable cruise. The CPM associated with a chined...

ROBERTS CAT 470

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 

CAT POWER SAILERS ( PS )

A CAT Power Sailer is a power cat capable of 12 to 30 knots under power and 12 to 18 knots under sail.

These catamarans were designed to be built using the fibreglass panel

Capriccio 21

Designer: 
Enrico Macera and Matteo Costa
Skill Level to Build: 
expert

In designing Capriccio we have been inspired by the aesthetics of the classic sport runabouts of the Thirties, which had the pilot seat in the extreme aft-wards of the boat and a powerful engine under a long deck in front of them. We kept the...

COASTWORKER 25

Designer: 
BRUCE ROBERTS-GOODSON
Skill Level to Build: 
AVERAGE SKILLS

Coastworker 25 Plans and patterns available for building in either Steel, Aluminum, Fiberglass or Wood Epoxy

12' Catspaw Dinghy

Designer: 
Joel White and N.G. Herreshoff
Skill Level to Build: 
Intermediate

An open boat that rows with ease and swiftness and is stiff enough under sail to stand up to a breeze.

Construction: Carvel planked over steamed frames

Alternative construction: Lapstrake or strip

No lofting is required...

18' Swampscott, JOHN DORY

Designer: 
Iain Oughtred
Skill Level to Build: 
Basic to Intermediate

A refinement of the traditional Swampscott working dory for recreational use.

Plans include nine different rigs.

Construction: Glued lapstrake plywood over sawn frames.

Alternative construction: Traditional dory construction...

Northwest Passage

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP is a very low-drag touring kayak intended for paddlers weighing 150-200 pounds. Built from 4 mm plywood, in a garage, you can build two for the price of one kit! Heavier? try NWP XL.

Half Model Plan SHADOW

Designer: 
N. G. Herreshoff
Skill Level to Build: 
Basic to Intermediate

Compromise sloop designed by N.G. Herreshoff in 1871. The plans produce a model that is 19″ long. When you purchase the set of plans, you also receive instructions on building by the "lift" method, as well as a bit of historical information on...