Boat Plans & Kits

If you are a designer who offers plans, or kit boats, we invite you to enter your information in the Directory of Boat Plans & Kits. There is no charge! This is for boats of ANY hull material. And if you’re in the market for a boat to build, this is a fine place to start.

 

830 results for All Boat Plans & Kits

Northwest Passage XL

Designer: 
Dave Kuperstein
Skill Level to Build: 
intermediate

NWP XL is a very low drag touring kayak for paddlers weighing 180-250 pounds. Built from 4mm plywood in a garage, you can build two for the price of one kit with these plans. Weigh less? see NWP.

Tammie Norrie

Designer: 
Iain Oughtred
Skill Level to Build: 
Intermediate to Advanced

Construction — Glued lapstrake clinker plywood.

Alternative construction —Traditional plank, cold molded and strip plank.

No Lofting required. Plans include 7 sheets with instructions.

Note: Sheet 3 was corrected in 2013...

M80

Designer: 
Wayne Barrett
Skill Level to Build: 
basic skills

M80, is a simple to build plywood trailable trimaran, plans are very complete and include DXF files for CNC cutting.

A standard folding system is used to faciltate trailing by road at a folded width of 2450mm.

The interior...

Alden 18' O Boat

Designer: 
John Alden
Skill Level to Build: 
Intermediate to Advanced

A safe, versatile round-bottomed daysailer with generous freeboard and deep cockpit.

Construction Method: Carvel planked over steamed frames

Alternative construction: Cold-molded or strip

Lofting is required

Plans...

20' Maid of Endor

Designer: 
John Atkin
Skill Level to Build: 
Advanced

This 20′ cutter will prove challenging to build, but will reward your efforts with incomparable charm and grace.

Atkin specifies traditional plank-on-frame construction.

Construction: Carvel-planked over steamed frames.

...

Crystal 16

Designer: 
Timm Smith
Skill Level to Build: 
Moderate

The Crystal 16 was designed to be a simple, lightweight flats skiff. Her hull is a simple V-bottom with a bit of flare in her topsides. Her deck features a large casting platform forward with two smaller platforms back aft on both sides. Storage...

Duo

Designer: 
Woods Designs
Skill Level to Build: 
beginner

The Duo is a simple to build 3m (10ft) hard chine rowing and sailing dinghy that can be built from just two sheets of 4mm (3/16in) plywood. It is also available as a nesting dinghy, so it can be stored on a cabin roof or even in the back of a...

Point Comfort 18

Designer: 
Doug Hylan
Skill Level to Build: 
beginner

Here is another little skiff inspired by a Chesapeake Bay working craft. In order to combine chine construction with the kind of bow that can punch into (instead of being punched around by) the Bay’s notorious chop, builders there have long used...

Trawler 28

Designer: 
Jacques Mertens
Skill Level to Build: 
some experience required

Our Trawler 28 is a sturdy offshore trawler with a straight shaft inboard diesel. This makes the TW28 an ideal boat for a couple to live aboard or for a crew of 4 on vacation.